skip to Main Content
ENQUIRIES (03) 9466 2553

Thought you might like a quick squiz at this latest review from Google. We work our tails off to be the absolute best at what we do, so it's always…

Read More


The brilliant, new GS Series bike racks are almost here and here's your chance to win one of TWO that we're giving away prior to the official launch. This promotion…

Read More


THIS SALE ENDED - MARCH 2019 This rack has been the "champion" in our stable for 15 years, revolutionising the Australian bike rack market from the moment it was first…

Read More

Fitting to ‘A’ frame.

Watch a short video (under 2 minutes)    CLICK HERE

View and download the complete Fitting Guide    CLICK HERE

Below is a quick look at what it’s all about

By far the best (and most common) way of mounting our Van-Racks to an “A” frame is with the “Bolt-On Mount” that fits over a cross member as shown in the first photo below. This is Method 1 & 2 from our Fitting Guide (and the video above).

But when the “A” frame doesn’t have a suitable cross member in the right place, then a new one needs to be fitted to the chassis. This is Method 2 from our Fitting Guide and is the required Fitting Method in approx 80% of cases.

Fitting the new cross member (above) has always involved welding directly to the “A” frame and while there is absolutely no issue in doing that (so long as it’s done properly), some customers and some manufacturers refuse to OK it. Which is why we developed this new fitting method that does not require any welding on the “A” frame at all.

Step 1 – These “SADDLES” are now included as standard with every Bolt-On Mount. They simply slip down over each arm of the “A” frame.

The new cross member that would normally have been welded into place between the arms of the “A” frame, now gets welded into place between the A-Frame “SADDLES” (see step 2 below). The whole lot can be lifted off the van (for full welding/painting) then slipped back onto the “A” frame (as Step 3 below) so the Bolt-On Mount and Van-Rack can then be fitted as usual.

The “SADDLES” suit 50 x 100 and 50 x 125 and 50 x 150 box ‘A’ frame sections and come with Hi-Tensile bolts and Nyloc (self-locking) nuts.

View and download the complete Fitting Guide    CLICK HERE





New Dealer in Newcastle

Very pleased to welcome Jayco Newcastle to our dealer list. This multi award winning dealership prides itself on being a one-stop RV shop and now, with the addition of GripSport…

Read More
Back To Top